Material

The size and material of the reel are different depending on the material and specifications of the product being wound and the application. Common materials currently on the market are: steel reel, plastic reel, wooden reel, paper reel, tinplate wire plate. Winding wire winding wire generally use the steel structure, but the winding fine wire and non-ferrous metal wire can be used wooden reel and plastic reel.

Parameter

Wire rope for the rope with the outside diameter of the inner diameter and net width ratio is usually 1: 0.4: 0.6. Steel wire rope with the finished product is larger, according to the thickness of wire rope, a wooden I-wheel, iron wood wheel, steel I-wheel. The largest diameter of a large wooden wheel or iron-wood wheel is up to 6m. Semi-finished steel wire used in steel I-wheel is usually a large diameter, net width is small. V = B (D2-d2) × 0.7854 × 7.85K; Where V is the capacity of the I-wheel, g; B is the width of the I-wheel, cm; D is the capacity of the wheel, Cm, d is the inside diameter of the I-shaped wheel, cm; K is the density coefficient of the wire winding.

product features 

Steel I-wheel: the use of reinforced thick plate welding molding, dynamic balancing test by machining, high strength, rigidity, high-speed operation retractable line smoothness. The disadvantage is that, after prolonged use, high cost of rust, galvanized products can not avoid the time and the impact of wet weather on the product, and deformation or damage is not easy to repair. In this case,

It has the characteristics of good balance, high strength, acid and alkali corrosion resistance, etc. The precision of the balance is up to 6.3 grade. It has the advantages of high precision, advanced structure and strong side bars. . The overall structure is plastic, metal supporting combination to ensure that the shaft hole requirements and conductive properties, product parts can be replaced, easy maintenance, the general requirements of the equipment according to customers, do different strength accuracy of the word wheel, drawback is that retractable rice Long, due to large capacity and make the flange (disc) deformation.

Wooden I-wheel: made of multi-layer plywood side panels, according to the use and requirements of different grades of kraft paper core, waterproof and load-bearing capacity of the largest load-bearing core 3 tons, supporting metal combination to ensure that the overall product Consistent. In the thickness of the board, there are corresponding requirements, according to the weight of different products with different thickness of wood. In recent years, the application of wooden reel more and more widely, for some foreign customers, the preference for the original eco-wood packaging products far superior to the advantages of plastic products much larger. Jiayou companies currently use multi-layer plywood up to the export of environmental standards, no smell, fumigation. Specifications than the flexibility of plastic discs, any size can be produced, the price of steel than a considerable advantage. If we must sum up a shortcoming, is the production efficiency is not high. Are on-demand production, no inventory, production cycle is slightly longer.

Paper word round: single-sided white lime paperboard, the current good friend of the company's own development of the two major structures, the whole tin core and plastic-wide paper reel. Paper tray light weight, environmental protection and low cost, according to customer requirements in the side of the disk surface printing of different content, illustrations. The disadvantage is limited load, as the packaging product is preferred, but only for one-time use. Generally considered vulnerable to the shortcomings of the current basic is not too much impact, usually outside the packaging tray will be added, the carton does not affect the situation will not make any damage to the internal packaging.

Uses

PN series machine process line is mainly used for the production cycle of fiber optic cable production and processing of income, pay-off; data communication cable series line, twisted, into a cable and other production process, pay-off; for RF cables, wires Cable high-machine income, high-cutter income, pay-off, the extruder income, pay-off, winding machine income, pay-off, etc.;

Steel I-wheel is used to retract the wire diameter is relatively fine products, high precision, such as 0.07MM-0.2MM such as silk. Suitable for domestic and foreign, the introduction of high-speed production line production line process. Product quality control precise strict, in the country ahead of similar products. Application: wire and cable and wire welding industry in the production process of drawing, copper, annealing, beam line, stranding, armoring, into a cable, in recent years mainly used for hose wire, spring steel wire, cutting wire retractable line use.

Wood, paper, I-wheel for all types of wires, cables, fiber optic cable, rope, ribbon, weaving nets, beads, steel wire, plastic tubes, neon LED lights, advertising flags and other packaging, the use of the more More and more, in the course of the user-friendly, easy to organize.